The shade measures approximately 24cm (9½ in.) in length with an opening of approximately 20cm (8 in.). The retaining rod allows the bulb holder to be positioned along a length of approximately 8cm (3 in.) inside the shade and is held in place via three small knurled screws at the rear of the shade. The lamp will require rewiring and safety-checked in whatever form it is used.

The post Vintage Paragon Focus-Spot Photographic Enlarger Shade appeared first on Anything In Particular.

This incredibly different lamp is in good, used condition and in fully working order. There are marks of wear and tear and some minor surface losses to the shade, but no major dents or dings at all. The rubber sleeve on the neck is in good shape. The clamp/base section has a few scratches but is in good shape.

The lamp - measured from base to shade at full neck extent- is approximately 66cm (26 in.) in length. The neck itself is 48cm (19 in.) long. The shade has an opening diameter of 11cm (4¼ in.) and is a semi-globe shape.  The slot has a depth of 6cm (2¼ in.) and a width of 3cm (1¼ in.).

The post Brutalist Gooseneck Lamp in Dark Brown by Gebruder Cosack appeared first on Anything In Particular.

The lamp folds down into a compact form measuring approximately 16cm length by 12cm width by 11cm depth (6¼in. by 5in. by 4½in.) and  comes with approximately 2m (6ft) of cabling to the plug.

The post Vintage Navy Blue Metek Folding Portable Desk Lamp appeared first on Anything In Particular.

Each castor is 30cm (12 in.) in length and is designed (it seems) to be mounted at an angle across the corner of a trolley or other movable unit. Height from wheel to mount is approximately 15cm (6 in.) and the wheels have a diameter of 6cm (2¼ in.).  The mounting points (four on each castor) will take an M5 bolt or screw thread. Each castor with mount weighs almost 600g (1½ lb.).

The post Large Industrial Castors made by Archibald Kenrick & Sons (set of four) appeared first on Anything In Particular.

We have temporarily mounted this one on a wooden base - partly for testing purposes -  but the lamp can be removed from this via screws and re-mounted on the base of your choice.  All joints are sound and their stiffness can be adjusted via the side screws. Although the lamp is wired, as with all electrical items we would recommend testing and re-fitting by the buyer. It should be noted that the length of cable on this lamp is rather restricted, so an inline-switch and re-wiring to a plug might be preferable for the buyer to consider.

The lamp extends to approximatelty 1m (30 in.) and is fully adjustable - the base and shade rotate and there are three independent joints for full flexibility.

The post Vintage BHI Lo-Vo Lite Adjustable Machinist / Lathe Workshop Lamp appeared first on Anything In Particular.

The board has been reformed so that it sits on the child's table and the latter has been sanded down and given a rough graphite grey Rustoleum furniture paint finish.  The final piece has been given a series of wax finishes to provide a durable and stylish surface. The drawing board has characterful signs of wear and use which - now waxed - adds to the attractiveness of the table.

The table top measures 40.5cm by 58.5cm (16in by 23in) and sits at a height of 46cm (18in).

The post Coffee or Side Table made from repurposed Winsor & Newton Drawing Board appeared first on Anything In Particular.

The stool tops measure  30 cm by 25 cm (12 in by 9¾ in) and the height of each stool is 58 cm (23 in). Please be aware that these are heavily used vintage items and have significant signs of use, including scratches, gouges and paint splatters, but they have been sanded and suitably waxed to provide a smooth and hard-wearing finish.

Please get in touch with us to discuss pricing and delivery/collection options.

The post Vintage School Classroom or Laboratory Stools appeared first on Anything In Particular.

It's had several coats of red and yellow paint over the years - at least two - with some great-looking wear and patina throughout, but it's been thoroughly cleaned so it's ready for interior use if required.  The chock is sturdy as you'd expect, and weighs in at approximately 3.2kg. When placed in position it measures 33cm (13 in) on its longest side, 24cm (9½ in) on its shortest and is approximately 20cm (8 in) in height.  It's not a delicate bit of kit, but it's got oodles of visual appeal for the right environment.

This item may be collected by the buyer or courier service arranged after purchase.

The post Large Metal Aircraft Chock appeared first on Anything In Particular.

The cabinet has two inner shelves of different heights for storage and has two holes in the back for wall mounting. The mirror is in good condition bar a few scratches and is quite heavy in the door, so this cabinet probably isn't stable enough for free standing unless you intend to weight it down. The interior has been cleaned and re-painted to provide a hammered silver look which is complementary to the exterior and to the exposed welds. The door handle is not original - we have added a new one which we think is sympathetic to the no-nonsense look of the cabinet, but it would be a simple task to replace with your choice of hardware. The original toothbrush holder is missing from the inside of the door, a minor fault when compared to the aesthetic appeal of this cabinet. And the surface patina of dings, scratches and scrapes only add to that, we think.

The post Industrial Look Metal Bathroom Cabinet by GENYK appeared first on Anything In Particular.

Measures approximately 7.5 x 9.5 inches at its widest with the main body measuring 3,5 inches in diameter and 4 inches in height.

The post Vintage “Monitor” Blow Torch No. 26 appeared first on Anything In Particular.